|
|
Replacement Rotary Vane Vacuum Pumps,Parts & Service Kits
[Page40Top]
shipping weight: 55 LB
|
RV11-0211, RV23-0523, & RV23-1023
The Oilless Rotary Vane,Air Sampling Pumps incorporated in HI-Q ’s continuous duty air sampling systems have “Lubricated-for-Life ” ball bearings which leaves the internal workings virtually maintenance free.The only servicing needed is the occasional replacement of vanes,“O ” Rings,,filters,and gaskets when they become worn.Many variables determine the life expectancy of a pump,such as ambient temperature,operating cycle/speed,duty level,condition of air handled and unit maintenance.HI-Q recommends inspecting the pump system every 2,000 hours. Inspection is done within a few minutes by removing a few bolts and the pump end casting which exposes the rotor and vanes.
0523-101Q-SG588DX - Oilless rotary vane vacuum pump with ¼ HP, 100-115/220-230-60-1;100-110/220-240-50-1 open motor with thermotector. 4.5 CFM (60 Hz), 3.8 CFM (50 Hz) open to air, 26 inches maximum vacuum, 10 psi maximum pressure. Note: This model does NOT include a pre-tapped handle mounting hole.
0523-102Q-G588DX - Oilless rotary vane vacuum pump with ¼ HP, 100-115/220-230-60-1;100-110/220-240-50-1 open motor with thermotector. 4.5 CFM (60 Hz), 3.8 CFM (50 Hz) open to air, 26 inches maximum vacuum, 10 psi maximum pressure. Note: This model INCLUDES a pre-tapped handle mounting hole.
1023-101Q-SG608X - Oilless rotary vane vacuum pump with ¾ HP, 100-110/220-240;100-115/208-230;50/60-1 open motor with thermotector. 10 CFM open to air, 26 inches maximum vacuum, 10 psi maximum pressure.
AA816 - Cord & Plug Assembly with quick press on adapters for ½ to ¾ HP electric motors.
AC174B - Carrying handle for ¼ HP air sampling pumps.
AK510 - End Cap (only) for 0523 & 0823, & 1023 Series pumps
AK524 - Felt filter for 0523 & 0823, & 1023 Series pumps
AK840 - Filter/Muffler for 0823 & 1023 Series Pump Exhaust: 3/8” MNPT
AK840A - Filter/Muffler for 0323 & 0523 Series Pump Exhaust: ¼” MNPT
0523-101Q-SG588DX replaces 0523-101Q-G588DX
1023-101Q-SG608X replaces 1023-101Q-G608X
K218- Rebuild Kit for 1/6 HP, 0211-Series vacuum pumps
K478- Rebuild Kit for ¼ HP, 0523-Series vacuum pumps
K479- Rebuild Kit for ¾ HP, 1023 & 0823 Series vacuum pumps
AA348A- Replacement Carbon Vane (4 needed per pump) for 0211-Series vacuum pumps
AH850A- Replacement Carbon Vane (4 needed per pump) for 0523-Series vacuum pumps
AK513- Replacement Carbon Vane (4 needed per pump) for 1023 & 0823-Series vacuum pumps
AA617G- Complete Muffler/filter assembly w/ ¼” NPT glass for 0211 series vacuum pumps
AK526- Complete End Cap Assembly (2 required per pump, does not include O-Ring) for 0523, 0823, & 1023 Series vacuum pumps
AK473 - O-Ring for End Cap Assembly.
Freight is billed seperately for this item.
For a Ordering Information, please click on this link.
|
|
|
To ADD this item on your order fill in the fields below and select the 'Add to Order' button. Otherwise select the 'Don't Add' button.
|
|
|
|
|
|
